Advd Player Or S-Video Vcr Or Satellite Receiver; Satellite Receiver; Connecting A Dvd Player; Dvd Player With Component Video - Mitsubishi WS-73909 Owner's Manual

Do not display the same stationary images on the screen for more that 15%
WARNING:
of your total TV viewing in one week. Examples of stationary images are
letterbox top/bottom bars from DVD or other video sources, side bars when showing standard
TV pictures on widescreen TV's, stock market reports, video game patterns, station logos, web
sites, or stationary computer images. Such patterns can unevenly age the picture tubes causing
permanent damage to the TV. Please see page 70 for a detailed explanation.

Connecting a DVD Player

TV back panel
White
Red
DVD back panel
1
Y VIDEO 5.1 CH SURROUND
CENTER
2
White
5
C
B
S
3
4
C
R
Red
VIDEO OUT SUBWOOFER SURROUND
Figure 1. Connecting the DVD player.
See Appendix B, page 73, for compo-
nent video signal compatibility informa-
tion.
For digital audio connections, see your
DVD and A/V receiver Owner's Guides.
Connecting an S-Video VCR or

Satellite Receiver

TV back panel
1
White
2
Red
Any S-Video Device
AUDIO OUT
White
L
2
1
Red
R
Figure 2. Connecting an S-Video Device.
1
2
3
5
4
AUDIO OUT
AC IN
MITSUBISHI
2CH BITSTREAM/PCM
DVD PLAYER
DD-5000
MODEL
POWER SUPPLY 120V~ 60Hz
L
POWER CONSUMPTION 20W
SERIAL NO.
MANUFACTURED
R
DISTRIBUTED BY
MITSUBISHI DIGITAL ELECTRONICS
AMERICA, INC.
FRONT COAXIAL OPTICAL 9351 JERONIMO ROAD
IRVINE, CA 92618
MADE IN JAPAN
AUDIO IN VIDEO OUT
1
L
(Y/C)
2
R

DVD Player with Component Video

(Figure 1)
Connect the Component Video cables
from Y/Cr/Cb or Y/Pr/Pb VIDEO OUT
on the back of the DVD player to COM-
PONENT-1 or COMPONENT-2 on the
TV back panel, matching the correct con-
nection:
1
Y to Y
2
Cr or Pr to Pr
3
Cb or Pb to Pb
Connect a set of audio cables from
AUDIO OUT on the back of the DVD
player to COMPONENT AUDIO Input 1
or 2 on the TV back panel. The red
cable 4 connects to the R (right) chan-
nel, and the white cable
the L (left) channel.
S-Video VCR or Satellite Receiver
(Figure 2)
1
Connect an S-Video cable from VIDEO
OUT on the device back panel to VIDEO
INPUT-1, INPUT-2, INPUT-3, or INPUT-4
on the TV back panel.
2
Connect a set of audio cables from
AUDIO OUT on the device back panel to
AUDIO INPUT-1, INPUT-2, INPUT-3, or
INPUT-4 on the TV back panel. The
red cable connects to the R (right) chan-
nel and the white cable connects to
the L (left) channel. If your device
is mono (non-stereo), connect only the
white (left) cable.
Part II: Installation
5
connects to
21
21