Makita ER2650LH Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Trimmer
  5. ER2650LH
  6. Instruction manual

Makita ER2650LH Instruction Manual

Hide thumbs Also See for ER2650LH:
Table of Contents

Advertisement

Quick Links

See also: Technical Information
Petrol String Trimmer
ER2650LH
INSTRUCTION MANUAL
Original Instruction Manual
Important:
Read this instruction manual carefully before putting the Petrol String Trimmer into operation and strictly
observe the safety regulations!
Preserve instruction manual carefully!
ER2650LH

Advertisement

Table of Contents
loading

Related Manuals for Makita ER2650LH

Summary of Contents for Makita ER2650LH

  • Page 1 Petrol String Trimmer ER2650LH INSTRUCTION MANUAL Original Instruction Manual ER2650LH Important: Read this instruction manual carefully before putting the Petrol String Trimmer into operation and strictly observe the safety regulations! Preserve instruction manual carefully!

  • Page 2: Table Of Contents

    Thank you very much for purchasing the MAKITA Outdoor Power Equipment. Table of Contents Page We are pleased to recommend to you the MAKITA product which is the result of Symbols .................2 a long development program and many years of knowledge and experience.

  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS General Instructions – Read this instruction manual to become familiar with handling of the equipment.  Users  insufficiently  informed  will  risk  danger  to  themselves  as   well as others due to improper handling. – It is recommended only to lend the equipment to people who have proven to be experienced.
  • Page 4 – Start the Petrol String Trimmer only in accordance with the instructions. – Do not use any other methods for starting the engine! – Use the Petrol String Trimmer and the tools only for such applications as specified. – Only start the engine, after the entire assembly is done. Operation of the device is only permitted after all the appropriate accessories are attached! –...

  • Page 5: Cutting Attachments

    Authorized Service Agent. Use only genuine spare parts and accessories released and supplied by MAKITA. Use of non-approved accessories and tools means increased risk of accidents. MAKITA  will  not  accept  any  liability  for  accidents  or  damage  caused  by  the  use  of  non-­approved  cutting  attachments  and  fixing  devices  of  cutting   attachments, or accessories.

  • Page 6: Technical Data

    Engine Oil (automobile 4-stroke engine oil) For European countries only EC Declaration of Conformity We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s): Designation of Machine: Petrol String Trimmer Model No./ Type: ER2650LH Specifications:  see  “TECHNICAL  DATA”  table...

  • Page 7: Designation Of Parts

    DESIGNATION OF PARTS ER2650LH DESIGNATION OF PARTS Fuel tank Rewind starter Air cleaner I-O switch (on/off) Spark plug Exhaust  muffler Clutch case Rear grip Lock-off lever Handle Throttle lever Control cable Shaft Protector (Cutting attachment guard) Nylon cutting head Fuel  filler  cap...

  • Page 8: Mounting Of Handle

    Bolts MOUNTING OF NYLON CUTTING HEAD WARNING: Never use cutting blades. Be sure to use genuine MAKITA nylon cutting head. – If the nylon cutting head hits against a stone during operation, stop the engine and check the nylon cutting head immediately.

  • Page 9: Before Start Of Operation

    BEFORE START OF OPERATION Inspection  and  refill  of  engine  oil – Perform the following procedure, with the engine cooled down. – Set the engine level, remove oil cap (Fig. 1), and check to see whether or not there is oil in the range between the upper limit and lower limit marks of the oil pipe (Fig.
  • Page 10 Note •   Do not replace oil with the engine in a tilted position. •   Filling  with  oil  while  engine  is  tilted  leads  to  overfilling  which  causes  oil  contamination  and/or  white  smoke. Point 2 in Replacement of oil: “If oil spills out” –...

  • Page 11: Points In Operation And How To Stop

    POINTS IN OPERATION AND HOW TO STOP Observe the applicable accident prevention regulations! STARTING Move at least 3 m away from the place of refueling. Place the unit on the ground taking care that the cutting attachment does not come into contact with the ground or any other objects.

  • Page 12: The Nylon Cutting Head

    At times, such as winter, when starting the engine CLOSE is difficult Operate choke lever with the following procedure when starting engine. •   After implementing startup steps 1) to 3), set choke lever to the CLOSE position. •   Implement startup step 4) and start engine.
  • Page 13 Replacing the nylon cord Cover WARNING: Make sure that the cover of the nylon cutting head is secured to the housing properly as described below. Failure to properly secure  the  cover  may  cause  the  nylon  cutting  head  to  fly  apart   resulting in serious personal injury.

  • Page 14: Servicing Instructions

    SERVICING INSTRUCTIONS CAUTION:     Before  doing  any  work  on  the  equipment,  always  stop  the  engine  and  pull  the  plug  cap  off  the  spark  plug  (see  “checking  the   spark plug”). Always wear protective gloves! To ensure a long service life and to avoid any damage to the equipment, the following servicing operations should be performed at regular intervals.
  • Page 15 5)   Set  the  engine  level,  and  gradually  fill  up  to  upper  limit  mark  with  new  oil. External mark (upper limit) 6)   After  filling,  tightly  secure  oil  cap,  so  that  it  will  not  loosen  and  cause  leaks. If oil cap is not tightly secured, it may leak. External mark Internal stepped (lower limit)
  • Page 16 CHECKING THE SPARK PLUG – Only use the supplied universal wrench to remove or to install the spark plug. – The gap between the two electrodes of the spark plug should be 0.7 - 0.8 mm (0.028” - 0.032”). If the gap is too wide or too narrow, adjust it. If the spark plug is clogged or contaminated, clean it thoroughly or replace it.

  • Page 17: Storage

    STORAGE WARNING: When draining the fuel, be sure to stop the engine and make sure that the engine cools down. Just after stopping the engine, it may still be hot with possibility of burns, inflammability  and  fire. ATTENTION: When the machine is kept out of operation for a long time, drain up all fuel from the fuel tank and carburetor, and keep it at a dry and clean place.
  • Page 18 Operating time Before After Daily Shutdown/ Corres- 200h Item operation lubrication (10h) rest ponding P Inspect/clean Engine oil Replace Tightening parts Inspect (bolt, nut) Clean/inspect — Fuel tank Drain fuel Throttle lever Check function — Stop switch Check function Cutting attachment Inspect Low-speed rotation Inspect/adjust...

  • Page 19: Troubleshooting

    A twig is caught between the cutting Remove the foreign matter. attachment and the protector. The drive system does not work properly. Ask Makita authorized service center to Stop engine immediately! inspect and repair it. The unit vibrates abnormally. The cutting attachment is broken.
  • Page 20 Makita Corporation Anjo, Aichi, Japan www.makita.com 885077C220...

Table of Contents