Assigning A Function To 2Nd Row Cross-Point Buttons - Sony MVS-3000 System User Manual

a)
Command name
SWR GPI1 Test Fire
|
SWR GPI8 Test Fire
Panel GPI1 Test Fire
|
Panel GPI8 Test Fire
Macro Attachment Enbl
Macro Only Set
Pre Macro
Post Macro
Macro Take
Macro Cancel
Macro Auto Ins
Macro AT with Rate
Macro AT with A/B Bus
Macro TL with Region
System Manager Enbl
Inhibit Set
Inhibit All Clear
K-SS Store
a) For the safe title on/off commands (from ME1 PGM1 ST-ME1 PGM4 ST
to AUX1 ST-AUX24 ST), the name of the assigned output signal is
shown.
b) Pressing this button to turn it on enables key snapshot operations for all
control blocks.
Assigning a Function to 2nd Row
Cross-Point Buttons
You can assign functions to the 2nd row cross-point
buttons for the M/E-1 and PGM/PST banks.
1
Engineering Setup >Panel >Prefs/Utility >Xpt Module
Src/Reg Btn Assign menu (7324.2).
2
Select the button to be assigned.
3
In the <Action> group, select the function to be
assigned.
Function
Output test trigger from switcher GPI1
|
Output test trigger from switcher GPI8
Output test trigger from panel GPI1
|
Output test trigger from panel GPI8
Enable/disable macro attachment
Macro only mode on/off
Set macro attachment in pre macro
mode
Set macro attachment in post macro
mode
Macro execution
Cancel a macro
Macro auto insert mode on/off
When registering an auto transition
macro event, on/off setting of mode to
save transition rate
When registering an auto transition
macro event for the transition control
block, on/off setting of mode to save A/
B Bus cross-point settings
When registering a timeline macro
event, on/off setting of mode to save
applicable region
Enable/disable operation from System
Manager
Inhibit cross-point button
Clear all cross-point button inhibit
settings
Enable/disable key snapshot saving
4
Button status
Lit amber
Output (lights only at
the instant the button
is pressed)
Output (lights only at
the instant the button
is pressed)
Enabled
On
Can be set only while
pressed (lit)
Can be set only while
pressed (lit)
During execution
Lit only at the instant
the button is pressed
On
On
On
On
Enabled
Can be set only while
pressed (lit)
Can be set only while
pressed (lit)
b)
Enabled
Menu Shortcut: Assigns a frequently used menu to be
recalled (menu shortcut).
Utility Command: Assigns a function enable/disable
or similar operation (utility command).
Macro Recall: Assigns a macro register recall.
Shotbox Recall: Assigns a shotbox register recall.
Depending on the selection in step 3, make the
following settings.
If Menu Shortcut is selected: With the 2nd row
cross-point buttons flashing, press one of the
cross-points buttons after displaying the menu for
which you want to create a shortcut to assign the
menu shortcut. To finish the assignment, press
[Menu Shortcut] again.
If Utility Command is selected: A list of commands
appears on the right of the status area, select the
command you want to assign.
Off
When the output is
assigned
When the output is
assigned
Disabled
Off
When the function is
assigned
When the function is
assigned
When the function is
assigned
When the function is
assigned
Off
Off
Off
Off
Disabled
When the function is
assigned
When the function is
assigned
Disabled
229
Setting Button Assignments