Table Of Contents; Specifications - Makita LS1017 Instruction Manual

ENGLISH (Original instructions)
Contents
SPECIFICATIONS ....................................................................................................................................................... 2
ADDITIONAL SAFETY RULES FOR TOOL................................................................................................................. 4
INSTALLATION............................................................................................................................................................ 6
FUNCTIONAL DESCRIPTION..................................................................................................................................... 6
ASSEMBLY ............................................................................................................................................................... 10
OPERATION.............................................................................................................................................................. 14
MAINTENANCE ........................................................................................................................................................ 18
OPTIONAL ACCESSORIES ...................................................................................................................................... 20

SPECIFICATIONS

Model
Blade diameter
Blade body thickness
Hole diameter
For all countries other than European countries
For European countries
Max. Cutting capacities (H x W) with 260 mm in diameter
Miter angle
0°
45°
60° (right)
-1
No load speed (min )
Laser Type (LS1017L only)
Dimensions (L x W x H)
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
DOUBLE INSULATION
To avoid injury from flying debris, keep
holding the saw head down, after
making cuts, until the blade has come to
a complete stop.
When performing slide cut, first pull
carriage fully and press down handle,
then push carriage toward the guide
fence.
45° (left)
50 mm x 310 mm
50 mm x 220 mm
-
For all countries other than European countries•••19.4 kg
END223-1
2
Bevel angle
91 mm x 310 mm
91 mm x 220mm
91 mm x 153 mm
Red Laser 650 nm,
825 mm x 536 mm x 581 mm
For European countries•••19.5 kg
Do not place hand or fingers close to the
blade.
Adjust sliding fences clear of blade and
blade guard properly.
Never look into the laser beam. Direct
laser beam may injure your eyes.
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
LS1017 / LS1017L
255 mm - 260 mm
1.6 mm - 2.4 mm
25.4 mm
30 mm
0°
4,200
1mW ( Laser Class 2 )
/II
and its