Appendix A-Troubleshooting - NETGEAR MA701 User Manual

A A—T
PPENDIX
PROBLEM POSSIBLE CAUSES
The PDA does not The IP Address has not
recognize an IP taken effect yet.
Address
Mismatched network
settings, such as SSID
and WEP encryption.
The PDA does not The MA701 Software may
recognize the not be installed properly.
MA701 Wireless
CF Card
The PDA may need to
reset.
The battery's power may
be low.
The MA701 The SSID may be
Wireless CF Card incorrect.
cannot connect to
Mismatched WEP
a known Access
settings.
Point within
range
Incorrect Network Mode.
The Pocket PC Incorrect setting on Pocket
cannot browse PC.
the web even the
MA701 Wireless
CF Card
The IP address may not
associated with
be correct.
an Access Point
correctly
ROUBLESHOOTING
Remove and reinsert the MA701
Wireless CF Card or turn off and then
turn on the PDA.
Check and re-enter the same SSID
and WEP settings as Access Point.
Remove and then reinstall the MA701
Wireless CF Card's Driver/Utility
software.
Reset the PDA again.
Recharge the battery immediately.
Check and enter the correct SSID.
Check and make sure you have
configured the same WEP settings as
the Access Point
Check to see if the MA701 Wireless
CF Card is configured in Infrastructure
mode.
Under the Connections Settings in
Windows, make sure that you have
selected the Internet option for the "My
network card connects to:" field.
Change to a known valid IP address
or reset the Pocket PC.
33
SOLUTION