Step 5-Test For Wireless Access - NETGEAR MA701 User Manual

: For additional information on using the MA701 Configuration Utility,
Note
please refer to Chapter 3—Configuring the MA701 Wireless CF Card on page
15.
Step 5—Test For Wireless Access
Follow these steps to verify that the MA701 Wireless CF Card has been
successfully installed and that your wireless access is functioning properly.
1. Open the MA701 Configuration Utility and tap IP Status from the Status
page to view IP related information (shown below). A valid IP address
should be assigned for the MA701 Wireless CF Card.
2. Tap OK in the IP Status page to close it.
13