Main Charger - Sharp AR-C150 Service Manual

AR-C150
7) Remove the unit fixing screw B (1) and the unit fixing screw A (2).
2
8) Remove the fusing front paper guide fixing screw (1) and the
protector (2).
Keep the removed screw in the screw hole in the transfer section.
When in transit of the machine, fix the fusing front paper guide
with this screw.
D. Fusing and paper exit section
1) Insert and press the front side shaft (1) with a screwdriver.
2) Insert and press the rear side shaft (2) with a screwdriver.
1
2
1
4 – 7
E. Paper feed, paper transport section
1) Remove the rotating plate fixing material of the paper feed tray,
and remove the caution label.
5. Cleaning
A. Main charger
1) Open the front cover.
2) Remove the toner hopper unit.
3) Remove the process frame cover.
4) Press the main charger unit hook section and releaser the lock.
Remove the main charger unit (1) from the copier.
1
5) Remove the electrode section fixing screw (2) of the main charger
unit (1), and remove the electrode section (3).
2
6) Clean the tip of the electrode by pushing the electrode cleaner
through it. (Repeat 2 or 3 times.)
(Note) Do not move the cleaner when it is pushed through the
cleaner. When cleaning, clean the whole area evenly.
3
1