Changing The Volume Lock; Locking Volume Control To A Specific Device (Global Volume Lock); Unlocking Volume Control For A Single Device - NETGEAR EVA9000 User Manual

By default, the volume buttons control the volume for the device programmed on the selected
device mode. To configure your remote so that the volume buttons always control a specific
device (such as a TV), even if another device mode is selected, complete the following
instructions. This chapter also includes instructions for overriding this setting for one or more
devices, and for restoring the remote control to the default volume settings.
Note: The volume controls affect only programmed devices. See
"Programming the NETGEAR Universal Remote
Locking Volume Control to a Specific Device
(Global Volume Lock)
To configure your remote so that the volume buttons always control a specific device (such as a
TV), even if another device mode is selected:
1. Press and hold
2. Enter 9 9 3, and then press the mode button for the device you want to control volume (for
example, TV). The LED blinks twice.
Once set, volume is controlled for the configured device (for example, TV) even if another
device mode is selected.

Unlocking Volume Control for a Single Device

If the volume is locked to a specific device (as described in the previous instructions), you can
unlock the volume controls for the device. This allows you to control the volume for that device
when the device mode is selected.
For example, you can set the remote to always control the TV, and then unlock the AUX device
button so that you can control your stereo's volume when the AUX mode is selected.
1. Press a device button, for eample, TV.
2. Press SET until the red LED blinks twice.
SET until the red LED blinks twice.
v1.0, October 2008

Changing the Volume Lock

for more information.
Chapter 3
Chapter 2,
3-9