Searching For A Device Code; Discovering A Device Code - NETGEAR EVA9000 User Manual

Searching for a Device Code

If your device does not respond to the remote after trying all codes listed for your brand, or if your
brand is not listed, try searching for your code:
1. Press a device button once.
2. Press and hold
3. Enter 9 9 1, then the device group number (see the following table). The LED blinks twice.
Table 2-2. Device Group Codes
Code Device Group
0 Cable (cable converters, video accessories, satellite
receivers)
1 TV (TVs)
2 VCR (VCRs, DVD players)
3 Audio (audio amplifiers, audio tuners, CD players)
4. Aim the remote at the device, and press Power. The remote sends codes from its library to the
selected device, starting with the most popular code first. If the device responds, go to step 7.
5. If the device does not respond, press CH+. The remote will try the next code. Continue until
the device responds.
Tip: Press CH- to try the previous code.
6. To search for other device codes, repeat step 1 to step 5.
7. Press SET. This will save the latest code sampled.

Discovering a Device Code

If you set up the NETGEAR Universal Remote using the procedure in
Code" on page 2-7, you can discover the four-digit code used to operate your equipment.
For example, to find out the code assigned to your TV:
1. Press TV once.
2. Press and hold
Programming the NETGEAR Universal Remote
SET until the red LED blinks twice.
SET until the red LED blinks twice.
v1.0, October 2008
Universal Remote User Manual
"Searching for a Device
2-7