User Manual Contents - NETGEAR EVA9000 User Manual

Figure 1-2
Table 1-1. Device Buttons
Button Description
Press TV to control another home entertainment device, such
as a TV, that has been programmed on the remote.
Press DVD to control another home entertainment device,
such as a DVD player, that has been programmed on the
remote.
Press DE to control a Digital Entertainer Elite.
Press AUX to control another home entertainment device,
such as a cable or satellite receiver, amplifier, tuner, or other
auxiliary device, that has been programmed on the remote.

User Manual Contents

To program your NETGEAR Universal Remote, refer to the following sections:
• "Installing Batteries " on page
Batteries must be installed before you use the remote.
• Chapter 2, "Programming the NETGEAR Universal
Follow these instructions to configure the device buttons to control a TV, VCR, DVD player,
cable or satellite receivers, amplifier or tuner, or other device.
• Chapter 3, "Changing the Volume
By default, the volume buttons on your universal remote control only the selected device.
Follow the instructions in this section to configure the volume buttons to always control a
specific device, such as a TV, regardless of the selected device mode.
• Chapter 4, "Moving Button
You can copy a button's function to another button or device mode. For example, you can copy
the Repeat button function to another button, or enable the DVD controls in the TV mode.
Welcome
Device buttons
1-4.
Lock.
Functions.
v1.0, October 2008
Universal Remote User Manual
Remote.
1-3