Toro Workman MDX-D Service Manual page 147

Removal (Fig. 35)
1. Park machine on a level surface, stop engine, set
parking brake and remove key from the ignition.
2. Remove hood using Figure 35 as a guide.
Workman MDX--D
Installation (Fig. 35)
NOTE: Do not tighten fasteners securing the hood until
all fasteners are in place.
1. Install hood using Figure 35 as a guide. During as-
sembly, use fastener torque specifications that are iden-
tified in Figure 35.
Page 6 - - 45 Chassis