Change The Cable Connection Starting Frequency - NETGEAR CM600 User Manual

Change the Cable Connection Starting Frequency

The starting frequency for the cable connection is automatically generated. For most Internet
connections, you do not need to change this information.
WARNING:
Do not change the starting frequency unless your cable Internet
provider instructs you to do so. Changing the starting frequency
incorrectly causes serious connection and Internet problems.

To change the starting frequency:
1. Launch a web browser from a computer that is attached over an Ethernet cable to the
cable modem or from a computer that is connected to a WiFi router that is attached over an
Ethernet cable to the cable modem.
2. Type http://192.168.100.1.
A login window opens.
3. Enter the cable modem user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select Cable Connection.
5. In the Starting Frequency field, type a number as instructed by your cable Internet provider.
CM600 Cable Modem
DRAFT
Manage and Monitor
21