Mx-Fxx1 (Facsimile Expansion Kit); Main Unit - Sharp MX-2300 G Installation Manual

MX2700N [19] MX-FXX1
1. Unpacking
A. Parts included
Line cable:
2. Installation
<Note before installation>
• Start installation after checking that the LINE indicator and the
DATA indicator below it on the operation panel are neither lit nor
blinking.
A. Turn off the power switches of the main unit.
1) Turn the power switch located on the operation panel to the
"OFF" position.
2) After checking that the operation panel has gone out, open the
front cabinet and turn the main power switch to the "OFF" opsi-
tion.
3) Remove the power plug of the main unit from the outlet.
Australia
MX-2300/2700 N/G MX-FXX1 19 – 1
B. Attach the fax box unit to the rear part of the

main unit.

1) Remove the two screws from the rear cabinet of the main unit.
2) Attach the supplied step screw to one of the two positions from
which the screws are removed.
3) Insert the step screw into the mounting hole of the fax box unit.
4) Use a screw that has been removed in step 1) to secure the
fax box unit.
C. Pull out the control PWB.
1) Push the location indicated in the illustration to unlock, and
remove the ozone filter cover from the right rear cabinet.
2) Remove the screw from the right rear cabinet and remove the
right rear cabinet.