Samsung HG32EC690 Installation Manual page 70

• Modifying an existing Channel from the list
To modify parameters for an existing channel , including PTC number, program type, etc., follow these steps:
1. Select Air, Cable or Satellite.
2. Select Analog or Digital.
3. Select the channel from the list to Modify and click on Modify button.
4. Modify the respective fields.
5. Click Edit to modify the channel , or click Cancel
(For DTV channels in ATSC models, the display number has two fields: and
minior. These can be set to any values, from 0 to 999.)
• Deleting a Channel from the list
To delete an existing channel from the list user must follow the following steps:
1. Select Air, Cable or Satellite.
2. Select Analog or Digital.
3. Select a channel from the list click Delete.
• Channel - Editor
To change display no. or channel name, users must follow these steps:
1. Select Air, Cable or Satellite.
2. Select Analog or Digital.
3. Select the channel from the list to Edit and click Channel-
Edit.
4. Change the display number. or the name of the channel.
Click OK to edit the channel.
5. If a new display number. already exits, the application asks
users to modify the display number.
70
English
[HC690-EUROPE]Install Guide-X0ENG.indd 70 2014-04-08 11:20:55