Connecting The Rjp (Remote Jack Pack) - Samsung HG32EC690 Installation Manual

Output to any external source connected to RJP on the hotel desk.
RJP Rear
USB HDMI VIDEO AUDIO AUDIO/PC
1. Connect the PC IN / PC/DVI AUDIO IN
2. Connect the
AV IN [VIDEO]/[L-AUDIO-R]
3. Connect the AV IN [VIDEO]
4. Connect the HDMI IN
5. Connect the RJP
✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-
7660 (HD Plus).
• RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio
Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are con-
nected from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel
guests to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding
Active/Inactive sources. The TV will switch to the Active external source according to the priority set by the User.
✎ You can select
✎ When the TV is on, connect the TV and the
20
English
[HC690-EUROPE]Install Guide-X0ENG.indd 20

Connecting the RJP (Remote Jack Pack)

3 Video Cable
2 Audio Cable
4 HDMI cable
1 D-sub / PC Audio cable
port of the TV to the PC/AUDIO port of the RJP.
port of the TV to the VIDEO port of the RJP.
port of the TV to the VIDEO port of the RJP.
(1(ARC), 2(DVI) or 3) port of the TV and the HDMI port of the RJP.
port of the TV and the RS/232 port of the RJP.
or
HDMI IN 1, 2(DVI) 3(ARC)
RJP
5
and for connecting RJP.
AV IN
within 10 seconds.
TV Rear Panel
2014-04-08 11:20:41