Setting The Hotel Option Data - Samsung HG32EC690 Installation Manual

To Enter: Press the MUTE
To Exit from this menu : power off and turn on again.
✎ Depending on Model and Region, some menus do not exist on the TV set.
Hotel TV Function
Category
Hospitality Mode
SI Vendor
Power On
Channel
[HC690-EUROPE]Install Guide-X0ENG.indd 23

Setting the Hotel Option Data

→ 1 → 1 → 9 → ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is set.)
Item initial value
Hospitality Mode Standalone
SI Vendor OFF
Power On Channel Last Saved
Power On Channel
1
Num
Power On Channel
ATV
Type
Power On Volume Last Saved
Power On Volume
10
Num
Min Volume 0
Max Volume 100
Power On Source TV
Power On Option Last Option
Channel Setup
Channel Editor
Mixed Channel
ON
Map
Dynamic SI OFF
Description
Select Hospitality mode.
• Interactive mode : TV works with an SI STB or SBB.
• Standalone mode : TV works alone, without an SI STB or SBB.
• Interactive mode : Samsung / OCC / MTI / Nstreams / Enseo / Cardinal /
Guestek / Seachange / MDC / Innvne
• Standalone mode : Smoovie
Set the default values that will be applied when the TV is turned on.
• User Defined : Lets you set Power On Channel and Channel Type manually.
See Power On Channel and Channel Type below.
• Last Saved : If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
When the TV is turned on, it switches automatically to this channel.
Select channel band : AIR (analog air band), DTV (digital air band), CATV (analog
cable band), CDTV (digital cable band)
• User Defined : Lets you set the Power On Volume manually. See Power On
Volume below.
• Last Saved : When the TV is turned on, it returns to the volume that had been
set when the power had been turned off.
The TV turns on with this Volume Level in Stand Alone Hospitality mode.
The minimum Volume Level the user can set in Stand Alone Hospitality mode.
The maximum Volume Level the user can set in Stand Alone Hospitality mode.
Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after you
have unplugged the TV and then plugged it in again.
• LAST Option : Returns to its last Power state. If it was in Stand-by, it returns
to Stand-by. If it was on, it turns on.
• Power On : When the power returns, the TV turns on.
• Standby : When the power returns, the TV enters the Standby mode.
Gives you direct, immediate access to some of the Channel menu functions on
the user Channel menu such as Auto Program, Antenna selection, etc.
The Channel Editor lets you edit the channels stored in the TV's memory. Using
Channel Editor you can:
• Change the channel numbers and names, and sort the channels in your
desired channel number order.
• Apply the video mute to channels you select. The video mute blanks out
the video from a channel and outputs only the sound while displaying a
speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily,
without your having to display each channel directly.
This Feature enables showing/browsing all antenna type (Air/Cable or Satellite)
channels at the same time.
• On: When ON, guests can access the complete Channel Map irrespective
of the selected antenna type. The Channel list will also populate Air as well
Cable type channels.
• Off: When OFF, guest can access the Channel Map corresponding to the
selected antenna type [AIR/CABLE or Satellite] only. The Channel list/
Editor will only show the selected antenna type channels.
• On : Check the DTV Programme channel number. (the DTV channel editor
is inaccessible)
• Off: Do not check the DTV Programme channel number.
(the DTV channel editor is accessible, but additional channel Programme
number update is not supported)
23
English
2014-04-08 11:20:42