Disconnect; Cold Boot And Loss Of Host Re-Connection - Honeywell MX8 Reference Manual

Disconnect

USB Connection
Disconnect the USB cable from the MX8.
l
Tap the status bar icon in the lower right hand corner of the PC's status bar. Then tap the Disconnect button.
l
IMPORTANT – Do not put the mobile device into Suspend while connected via USB. The device will be unable to connect to
the host PC when it resumes operation.
Serial Connection
Disconnect the RS232 cable from the MX8.
l
Put the MX8 into Suspend by tapping the red Power button.
l
Tap the status bar icon in the lower right hand corner of the PC's status bar. Then tap the Disconnect button.
l

Cold Boot and Loss of Host Re-connection

ActiveSync assigns a partnership between a client and a host computer. A partnership is defined by two objects – a unique
computer name and a random number generated when the partnership is first created. An ActiveSync partnership between a
unique client can be established to two hosts.
When the mobile device is cold booted, the random number is deleted – and the partnership with the last one of the two hosts is
also deleted. The host retains the random numbers and unique names of all devices having a partnership with it. Two clients
cannot have a partnership with the same host if they have the same name.
If the cold booted mobile device tries to reestablish the partnership with the same host PC, a new random number is generated
for the mobile device and ActiveSync will insist the unique name of the mobile device be changed. If the mobile device is
associated with a second host, changing the name will destroy that partnership as well. This can cause some confusion when
re-establishing partnerships with hosts.
4-126
(Start > Settings > About > Device ID)