Connecting System Settings - NEC Univerge SV8100 Programming Manual

Issue 1.0
Program 50 : Common Channel Interoffice Signaling Service
Level:
IN
Description
Input Data
Item
Item
No.
01 Port Number of Common
Signaling Channel (T1)
02 Common Signaling
Channel Data Speed
Assignment (T1)
03
Originating Point Code
04 Destination Point Code
(T1)
05
Calling Name Indication
(T1)
06
--- Not Used ---
2 - 544
Use Program 50-02 : Connecting System Settings to define the settings for
each CCIS Route ID.
CCIS Route ID
Specify the Trunk port to send D-channel information.
This program is available for using DTI package.
Assign the baud rate of Common Signaling Channel
on DTI package.
Assign the Point Code of own side.
Assign the Point Code of destination side on the DTI
link.
Calling name indication does not send to destination
party if switch is turned to Disable.

50-02 : Connecting System Settings

Route ID 1~8: CCIS via DTI
Route ID 9: CCIS via IAD/CD-PVAA (IP-CCIS)
Description
Program 50 : Common Channel Interoffice Signaling Service
UNIVERGE SV8100
Input Data Default
0~200 0
0 = 64Kbps 1
1 = 56Kbps
2 = 48Kbps(1)
3 = 48Kbps(2)
0~16367 0
0~16367 0
0 = Disable 1
1 = Enable