Virtual Extension Key Enhanced Options - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 15-18 : Virtual Extension Key Enhanced Options to define the
operation when a Virtual Extension Key is pressed.
Input Data
Item
No.
01
02
Feature Cross Reference
None
Programming Manual
Program 15 : Extension, Basic Setup

15-18 : Virtual Extension Key Enhanced Options

Extension Number including Virtual Extensions
Item
Virtual Extension Key Operation Mode
Define if calls to a Virtual Extension Key
land on the Virtual or on the extension/
CAP/CO appearance.
This is assigned for the Virtual
Extension Key, not the extension it
resides on.
Display mode when placing a call on
Virtual Extension Key
Defines if calls to or from a Virtual
Extension Key display the Virtual
Extension Key name or the name of the
extension it resides on.
Default Settings
If a DIL rings a Virtual Extension, the Virtual Extension Key Operation Mode must
be set to 1, or the multiline terminal must have a CAP Key.
Conditions
None
Up to eight digits
Input Data Default
0 = Release
1 = Land on the
key
0 = Secondary
Extension
Name
1 = Actual Station
Name
Issue 1.0
Related
Program
0 20-04-01
0
2 - 191