Setting Up Button Manager - Sharp AL-2051 Service Manual

4) Click the "Set Tray Status" button and select the size of paper
that is loaded in each tray.
Select a tray in the "Paper source" menu, and select the size of
paper loaded in that tray from the "Set Paper Size" menu.
Repeat for each tray.
5) Click the "OK" button in the "Set Tray Status" window.
6) Click the "OK" button in the printer properties window.
D. Setting up button manager
Button Manager is a software program that works with the scanner
driver to enable scanning from the machine.
To scan using the machine, Button Manager must be linked with
the scan menu on the machine. Follow the steps below to link But-
ton Manager to scanner events.
Windows XP/Vista/7
1) Click the "Start" button, click "Control Panel", click "Hardware
and Sound", and then click "Scanners and Cameras".
• In Windows 7, click the "start" button and then click "Devices
and Printers".
• In Windows XP, click the "start" button, select "Control Panel"
and click "Printers and Other Hardware", and then click
"Scanners and Cameras".
2) Click the "SHARP AL-xxxx" icon and select "Properties".
• In Windows 7, right-click the "SHARP AL-xxxx" icon and
select "Scan properties".
• In Windows XP, select "Properties" from the "File" menu.
3) In the "Properties" screen, click the "Events" tab.
4) Select "SC1:" from the "Select an event" pull-down menu.
5) Select "Start this program" and then select "Sharp Button Man-
ager Z" from the pull-down menu.
6) Repeat Steps 4) and 5) to link Button Manager to "SC2:"
through "SC6:".
Select "SC2:" from the "Select an event" pull-down menu.
Select "Start this program", select "Sharp Button Manager Z"
from the pull-down menu. Do the same for each ScanMenu
through "SC6:".
7) Click the "OK" button.
Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menu 1 through 6 can be
changed with the setting window of Button Manager.
For the factory default settings of the scan menu and the proce-
dures for configuring Button Manager settings, see "Button
Manager settings".
Windows 2000
1) Click the "Start" button, select "Settings", and then click "Con-
2) Double-click the "Scanners and Cameras" icon.
3) Select "SHARP AL-xxxx" and click the "Properties" button.
4) In the "Properties" screen, click the "Events" tab.
5) Select "SC1:" from the "Scanner events" pull-down menu.
6) Select "Sharp Button Manager Y" in "Send to this application".
7) Click the "Apply" button.
8) Repeat Steps 5) through 7) to link Button Manager to "SC2:"
AL-2051 UNPACKING AND INSTALLATION 5 - 9
trol Panel".
Note: If other applications are shown, deselect the checkboxes
for the other applications and leave only the Button
Manager checkbox selected.
through "SC6:".
Select "SC2:" from the "Scanner events" pull-down menu.
Select "Sharp Button Manager Z" in "Send to this application"
and click the "Apply" button. Do the same for each ScanMenu
through "SC6:".
When the settings have been completed, click the "OK" button
to close the screen.
Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menu 1 through 6 can be
changed with the setting window of Button Manager.
For the factory default settings of the scan menu and the proce-
dures for configuring Button Manager settings, see "Button
Manager settings".