C. Setting Up Button Manager - Sharp AR-203E Service Manual

(2) Using the machine as a shared printer
(AR-203E/M200/M201)
If the machine will be used as a shared printer on a network, follow
these steps to install the printer driver in the client computer.
Note: To configure the appropriate settings in the print server, see
the operation manual or help file of your operating system.
1) Perform steps 2) through 6) in "Installing the software".
2) Click the "Custom" button.
3) Click the "MFP Driver" button.
Click the "Display Readme" button to show information on pack-
ages that are selected.
4) Select "Connected via the network" and click the "Next" button.
AR-203E/5420/M200/M201 UNPACKING AND INSTALLATION 5 - 7
5) Click the "Add Network Port" button.
In Windows Vista, the "Add Network Port" button does not
appear.
6) Select the network printer that is shared and click the "OK" but-
ton.
Ask your network administrator for the server name and printer
name of the machine on the network.
7) In the printer port selection window, verify the network printer
that is shared and whether the machine is to be used as the
default printer, make the selections and click the "Next" button.
Follow the on-screen instructions.
Caution:
• If you are using Windows Vista and a security warning window
appears, be sure to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a warning message
appears regarding the Windows logo test or digital signature, be
sure to click "Continue Anyway" or "Yes".
8) You will return to the window of step 3). Click the "Close" button.
Note: After the installation, a message prompting you to restart
your computer may appear. In this case, click the "Yes" but-
ton to restart your computer.
This completes the installation of the software.

C. Setting up Button Manager

Button Manager is a software program that works with the scanner
driver to enable scanning from the machine.
To scan using the machine, Button Manager must be linked with the
scan menu on the machine. Follow the steps below to link Button
Manager to scanner events.
(1) Windows XP/Vista
1) Click the "start" button, click "Control Panel", click "Printers and
Other Hardware", and then click "Scanners and Cameras".
In Windows Vista, click the "Start" button, select "Control Panel"
and click "Hardware and Sound", and then click "Scanners and
Cameras".