Advertisement
To reset the system:
1. Clear the cause of the alarm, fault or tamper.
2. Enter a valid PIN, and then press
a valid prox tag at a proximity reader
(cancelling the alarm, fault or tamper
condition).
3. View the alarm, fault or tamper conditions on
the keypad. If there is more than one condition
press
to see each one.
A
Overriding
If the message ent=CONTINUE SET is displayed
on the keypad, press
ent
alarm, fault or tamper condition.
If the message ent=CONTINUE SET is not
displayed on the keypad, ask an engineer to attend to
the alarm, fault or tamper condition.
The menu
There are two menu structures, a full menu and a
quick menu.
Full menu
The full menu is made up of various options that
enable users to modify the functions of the system.
Only authorized users and engineers have access to
the full menu.
Quick menu
The quick menu is a made up of ten options from the
main menu. This menu structure is the default for
users with a level of 3 and above.
To access the menu:
1. Enter a valid PIN, and then press
accessed depends on your level and
authorisation).
2. Press
or
to scroll through the menu options.
A
B
3. Press
to enter a menu option.
ent
or present
ent
to override that particular
(the menu
ent
If an alarm, fault or tamper is present on the keypad
it must be overridden before the menu can be
accessed. Refer to the Alarms, faults and tampers on
the previous page.
Menu options
The menu options are used to modify particular
functions of the system. The main menu options are:
Menu 11 – Omit Zones
Menu 22 – Display Log
Menu 42 – Codes
Menu 47 – Remote Access
Menu 48 – Eng. Access
Note: For more information on all the menu
options, refer to the full user guide.
Menu 11 – Omit Zones
This option enables a user, with a level of 3 or
above, to omit zones they do not want to set.
Menu 22 – Display Log
This option enables a user, with a level of 4 or
above, to view a history log of the system's events.
Menu 42 – Codes
This option enables a manager, with a level of 6 or
above, to assign, modify or delete a user's settings.
Menu 47 – Remote Access
This option enables a manager, with a level of 6 or
above, to control the remote servicing connections.
Menu 48 – Eng. Access
This option is used to enable an engineer to access
and program the system.
User administration
To add a new user to the system or to modify a
current user's settings use the 42.1=User Codes
menu option. Use this option to assign or modify a
user's:
PIN
Level
Assigned groups
2
Advertisement
