D-Link DES-1228 Reference Manual page 87

config stp instance_id
Restrictions
Example usage:
To configure instance ID 2 to add VID 10:
DES-1228/ME:4#config stp instance_id 2 add_vlan 10
Command : config stp instance_id 2 add_vlan 10
Success.
DES-1228/ME:4#
Example usage:
To remove VID 10 from instance ID 2:
DES-1228/ME:4#config stp instance_id 2 remove_vlan 10
Command : config stp instance_id 2 remove_vlan 10
Success.
DES-1228/ME:4#
delete stp instance_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete STP instance ID 2 from the Switch.
DES-1228/ME:4#delete stp instance_id 2
Command: delete stp instance_id 2
Success.
DES-1228/ME:4#
config stp priority
Purpose
Syntax
Description
Parameters
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Only Administrator-level users can issue this command.
Used to delete a STP instance ID from the Switch.
delete stp instance_id <value 1-8>
This command allows the user to delete a previously configured STP instance ID from the
Switch.
<value 1-8> − Enter a value between 1 and 8 to identify the Spanning Tree instance on the
Switch.
Only Administrator-level users can issue this command.
Used to update the STP instance configuration
config stp priority <value 0-61440> instance_id <value 0-8>
This command is used to update the STP instance configuration settings on the Switch.
The MSTP will utilize the priority in selecting the root bridge, root port and designated port.
Assigning higher priorities to STP regions will instruct the Switch to give precedence to the
selected instance_id for forwarding packets. The lower the priority value set, the higher the
priority.
priority <value 0-61440> − Select a value between 0 and 61440 to specify the priority for a
specified instance ID for forwarding packets. The lower the value, the higher the priority.
82