Asymmetric Vlan Commands - D-Link DES-1228 Reference Manual

The asymmetric VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
Each command is listed, in detail, in the following sections.
enable asymmetric_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable asymmetric VLANs:
DES-1228/ME:4#enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DES-1228/ME:4#
disable asymmetric_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable asymmetric VLANs:
DES-1228/ME:4#disable asymmetric_vlan
Command: disable asymmetric_vlan
Success.
DES-1228/ME:4#
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Parameters
Used to enable the asymmetric VLAN function on the Switch.
enable asymmetric_vlan
This command enables the asymmetric VLAN function on the Switch
None.
Only Administrator-level users can issue this command.
Used to disable the asymmetric VLAN function on the Switch.
disable asymmetric_vlan
This command disables the asymmetric VLAN function on the Switch
None.
Only Administrator-level users can issue this command.
A
SYMMETRIC
244
36
VLAN C
OMMANDS