Chapter 7 NAS Function Setting and Display
7.2 Network Interface > show nas-interface
■
Output
NAS Interface No.
Port
VLAN ID
RIP
IP Address
Subnet Mask
Gateway IP Address
Link Local Address
Connect IP Address
or
Subnet Prefix Length
IPv6 Gateway IP Address
■
Example(s)
The following example shows settings when no option is specified:
CLI> show nas-interface
<NAS Interface Information>
NAS Interface No.
Port
VLAN ID
RIP
IP Address
Subnet Mask
Gateway IP Address
Link Local Address
Connect IP Address
IPv6 Gateway IP Address [-]
<NAS Interface Information>
NAS Interface No.
Port
VLAN ID
RIP
IP Address
Subnet Mask
Gateway IP Address
Link Local Address
Connect IP Address
IPv6 Gateway IP Address [FE80::2AA:FF:FE9A:21B8]
NAS interface number
Port number
VLAN ID. If no value is specified, a hyphen (-) is displayed.
Indicates whether to receive routing information using Routing Information Protocol (RIP)
(Enable or Disable).
IPv4 address. If no value is specified, a hyphen (-) is displayed.
IPv4 subnet mask. If no value is specified, a hyphen (-) is displayed.
IPv4 gateway address. If no value is specified, a hyphen (-) is displayed.
IPv6 link local address. If no value is specified, a hyphen (-) is displayed.
IPv6 global address, unique local IP address, or IPv6 subnet prefix length. If no value is
specified, a hyphen (-) is displayed.
IPv6 gateway address. If no value is specified, a hyphen (-) is displayed.
[25]
[CM#0 CA#0 Port#0]
[4090]
[Enable]
[192.168.2.64]
[255.255.255.0]
[0.0.0.0]
[-]
[-]
[20]
[CM#0 CA#0 Port#1]
[4080]
[Disable]
[-]
[-]
[-]
[FE80::290:CCFF:FEA4:3A49]
[2001:DB8::8:800:200C:417A/7]
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
750
P2X0-1210-05ENZ0