Chapter 6 Information Settings and Display
6.3 Maintenance Information > export log
export log
This command exports the log files that are stored in the system to the specified FTP server.
■
Syntax
export log -port {maintenance|remote | fst} -server
filename
-filename
-last-24h {enable|disable}] [-iom-log {enable | disable}] [-customer-info {enable|disable}]
[-indicator {enable | disable}]
■
Parameter
-port
-server
-user
YYYYMMDD-hhmmss
[-starting-time
This parameter specifies which Ethernet port is used to connect to the FTP server. For details,
refer to
"1.11 Note for Specifying FTP Server" (page 35)
maintenance
MNT port
remote
RMT port
fst
FST port (not supported by the ETERNUS DX100 S3/DX200 S3 or the ETERNUS
DX200F)
This parameter specifies the name of the FTP server that will receive the logs. The server name
format is IPv4 standard notation (a base 256 "d.d.d.d" string) or a fully qualified domain name
(FQDN).
Example: -server 192.168.1.20
Example: -server foo.bar
server_name
FTP server name
This parameter specifies the user name that can access the FTP server. This command displays
a password prompt.
login_user_account
User name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
server_name
-user
-ending-time
682
login_user_account
YYYYMMDD-hhmmss
|
P2X0-1210-05ENZ0