Show Snmp-Trap - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > show snmp-trap

show snmp-trap

This command displays a list of the defined SNMP traps.
■
Syntax
show snmp-trap
■ Parameter
No parameters.
■ Output
Trap No.
SNMP Version
Manager Number
IP Address
Community Name
User Name
Port Number
■ Example(s)
The following example displays a list of all the defined SNMP trap:
CLI> show snmp-trap
Trap SNMP Manager IP
No. Version Number
---- ------- ------- --------------------------------------- ---------------------------------- ---------------------------------- ------
1 v1
1 v1
2 v2c
3 v3
Number of the entered SNMP traps
SNMP version (v1/v2c/v3)
Manager number
IP address
SNMP community name. This is not displayed if the version is not v1 or v2c.
SNMP user name. This is not displayed if the version is v1 or v2c.
Trap sending port number
Address
1 1.1.1.1
1 192.168.100.250
2 fd80::abdd:223:ab
3 10.0.0.1
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Community
Name
"community1"
"community1"
"community2"
538
User Port
Name Number
162
162
162
"User1" 162
P2X0-1210-05ENZ0