Download Print this page

GE GBS2OKB Owner's Manual And Installation Instructions page 65

Icemaker accessory kit

Advertisement

Installation Instructions
[] INSTALL THE MOUNTING
SCREWS
• Skip to Step 5 if screws are already in place in
the freezer side wall.
• Install two serf-tapping
Phillips
head screws (14) from the kit
in the holes in the side wall.
The screw heads should
extend
about 1/2'
(13 ram) from the
side wall.
[] INSTALL THE ICEMAKER FILL CUP
Install the ieemaker
fill cup (side-mounted)
(18)
into the icemaker
as shown.
I_MOUNT
THE ICEMAKER
• Lift the icemaker
so the Fill tube shipped
with the
refrigerator
fits in the fill map opening
(E). Hang
the icemaker
on the two mountlng
screws (14) in
the side wall.
Make sure:
• The power cord is still firmly in the socket.
• The fill tube extends
into the fill cup opening
on
the back of the icemaker.
(Check
the rear of the
refrigerator
to make sure the fill tube has not
been pushed
out of the back of the refrigerator).
• The icemaker
mounting
screws are located
in
the uppermost
position
of the mounting
slots.
• The icemaker
is level.
• The icemaker
power switch is set to 0 (off).
THEN
SECURELY TIGHTEN
THE ICEMAKER
MOUNTING
SCREWS.
[]PLUG
IN THE ICEMAKER
Holding
the icemaker
in place, insert the icemaker
power cord plug into the socket on the rear wall,
making
sure the prongs
and holes are matched.
Press the plug firmly into the socket. Lock the plug
in place by clipping
the restraints
onto each side of
the plug. Make sure the restraints
click into place.
Make sure the power cord is still in the hook on
the back of the icemaker.
r
Hook
[] RE-INSTALL THE SHELF SUPPORT,
BUCKET, SHELF AND BASKET
Replace the center
vertical shelf support,
ice bucket,
chiller shelf and storage basket by reversing
the steps
in Step 1.
1_ ATTACH WARRANTY
LABEL
A label (9) is provided
with this kit to record
the
date of installation
for warranty
purposes.
Apply it
to the back of the refrigerator.
_]KEEP THIS MANUAL
The warranty for the icemaker is printed ha this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker
installation
inside the freezer is now
complete.
Continue
to the Water Valve Assembly
section.
59

Advertisement

loading