Advertisement
Installation Instructions
[] POWER CORD ADAPTER
There are two power cord adapters
included
with the
kit; be sure to use the one specified in the Parts List
on page 7. Plug the female end oftbe
power cord
adapter
(20) onto the male terminals
on the icemaker
power cord. When connecting
the adapter
to the
power cord, make sure the seal is in place between
the connectors.
Secure the power cord adapter
to
the icemaker
by putting it into the hook at the back
of the icemaker
and attaching
it to the icemaker
with
a wire tie (22).
@
MOUNT THE ICEMAKER
• Lift the icemaker
up and hang it on the icemaker
bracket
(28). Make sure the insulated
fill tube (23)
goes into the fill cup (25) opening.
To secure the
icemaker
to the bracket
(28), use two screws (24)
and install as shown.
Make sure:
• The power
cord is still firmly in the socket.
• The insulated
f'dl tube (23) extends
into the fill
cup opening
at the back of the icemaker.
(Check
the rear of the refrigerator
to make sure that the
fill tube has not
pushed
out the
back of the
refrigerator).
• The icemaker
is secured
to
the bracket.
I_INSTALL THE ICEMAKER FILL
CUP AND INSERT
Install the icemaker fill cup (center-mounted)
(25)
and icemaker
insert (26) into the icemaker
as shown.
[] PLUG IN THE ICEMAKER
Holding
the icemaker
in place, insert the power
cord plug into the socket, making
sure that the
prongs and holes are matched.
Press the phlg firmly
into the socket. Lock the plug in place by clipping
the restraints
onto each side of the plug. Make sure
the restraints
click into place.
[]INSTALL
THE ICE BUCKET
Place the ice bucket (11) under
the icemaker.
Make sure the icemaker
power switch is set to O (off)
][_ ATTACH WARRANTY LABEL
I
A label (9) is provided
with this kit to record
the date I
of installation
for warranty
purposes.
Apply it to the
I
back of the refrigerator.
I
I
[]
KEEP THIS MANUAL
The warranty for the icemaker is printed
in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker
installation
inside the freezer is now
complete.
Continue
to the Installing
the Water
Valve Assembly section.
31
Advertisement
