Advertisement
Installation Instructions
[] POWER CORD ADAPTER
There are two power cord adapters
included
with
the kit; be sure to use the one specified in the Parts
List on page 7. Plug the female end of the power
cord adapter (20) onto the male terminals
on the
icemaker power cord. When connecting
the adapter
to the power cord, make sure the seal is in place
between the connectors.
Secure the power cord
adapter
to the icemaker
by putting
it into the hook
at the back of the icemaker
and attaching
it to the
icemaker
with awire fie (22).
61 INSTALL THE ICEMAKER FILL CUP
Install the icemaker
fill cup (side-mounted)
(18) into
the icemaker
as shown.
_PLUG
IN THE ICEMAKER
Holding
the icemaker
in place, insert the icemaker
power cord plug into the socket on the rear wall,
making
sure the prongs and holes are matched.
Press
the plug firmly into the socket. Lock the plug in
place by clipping
the restraints
onto each side of the
plug. Make sure the restraints
click into place.
@,
[] MOUNT THE ICEMAKER
• Lift the icemaker
so the fill tube (16) fits in the
f'fll cup opening
(E). Hang the icemaker
on the
two mounting
screws (C) on the mounting
block.
Make sure:
• The power cord is still firmly in the socket.
• The fill tube (16) extends
into the fill cup
opening
on the back of the icemaker.
(Check
the rear of the refrigerator
to make sure the fill
tube has not been pushed
out of the back of the
refrigerator).
Make sure the icemaker
power switch is set to O (off).
THEN SECURELY TIGHTEN
THE ICEMAKER
MOUNTING
SCREWS.
[] INSTALL
THE ICE BUCKET
Place
the lower
freezer
basket
back
into
the
freezer
drawer.
The upper
freezer
basket is actually
2 baskets hooked
together.
Remove basket on the left
by unhooking
it.
Place the remaining
upper
basket in the freezer
drawer on the right side. Place the ice bucket in
the left side of the lower basket.
[] ATTACH WARRANTY LABEL
A label (9) is provided
with this kit to record
the
date of installation
for warranty
purposes.
Apply
it to the back of the refrigerator.
[]
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker
installation
inside the freezer is now
complete.
Continue
to the Water Valve Assembly
section.
55
Advertisement
