Philips PerfectCare PSG9030/20R1 User Manual page 7

Steam boost function
The steam boost function is designed to help tackle difficult creases.
- Press the steam trigger twice quickly to activate the steam boost function.
The appliance releases 3 powerful shots of steam (Fig. 16).
Vertical ironing
Hot steam is emitted from the iron. Never attempt to remove creases from
a garment that someone is wearing. Do not apply steam near your or
someone else's hand.
You can use the iron in vertical position to remove wrinkles from hanging
fabrics.
1
Hold the iron in vertical position, press the steam trigger and touch the
garment slightly with the soleplate (Fig. 17).
Note: For your safety, the intelligent automatic steam mode is not available
for vertical ironing.
MAX setting
For higher amount of steam, you can use the MAX setting.
1
Press and hold the on/off button for 2 seconds until the MAX light turns
white (Fig. 18).
Note: In Max setting, your appliance will always give the maximum steam
amount, while the temperature will still adjust automatically.
2
The appliance returns to normal steam mode automatically after 15 minutes
to save energy.
3
To directly switch off the MAX setting at any time, press and hold the on/off
button for 2 seconds until the MAX light goes off.
Auto shut-off
- To save energy, the appliance enters the standby mode if it has not been
used for 4-5 minutes. The light in the on/ off button starts to flash (Fig. 19).
- To activate the appliance again, press the on/off button or the steam trigger.
The appliance starts to heat up again.
- The appliance switches off automatically if it has not been used for another
10 minutes after it enters the standby mode. The light in the on/off button
goes off.
ENGLISH
9
16
2x
17
18
2 sec
19