UPS2000-G-(6 kVA–20 kVA)
User Manual (Lead-Acid Battery)
5.6.3.3 System Parameters Screen
●
●
Issue 23 (2024-03-15)
Item
Description
BPS
Set the output dry contact associated
backfe
with bypass backfeed. When a bypass
ed
backfeed alarm is generated, this dry
contact is enabled.
Faulty
Set the output dry contact associated
UPS
with UPS faults. When a critical
alarm is generated, this dry contact is
enabled.
Parallel screen
Figure 5-27 Parallel screen
Table 5-18 Parallel settings
Item
Description
Single/Parallel
Specifies whether the UPS
works in single mode or
parallel mode. This
parameter is configurable
only after the inverter is
shut down.
Redundant UPSs
Set the number of redundant
UPSs. This parameter is
configurable only after the
inverter is shut down.
Output screen
Figure 5-28 Output screen
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Control Panel
Default
Value Range
Value
Dry
Dry contacts 1–
contact
6
5
Dry
Dry contacts 1–
contact
6
6
Default
Value Range
Value
Single
Single, Parallel
0
0–3
86