Table of Contents
Advertisement
CHAPTER 3: CONFIGURING THE D20E FIRMWARE
DAPserver Studio sync project
Working with projects
D20E ETHERNET I/O MODULE INSTRUCTION MANUAL
12. Connect to the new IP address after the D20E module has restarted.
If the D20E IP address was changed to a different subnet, the PC Ethernet port must
also be changed to that subnet.
Any D20E IP Address, independent from the open DAPserver Studio project, can be
changed with this process. Just enter the IP Address of the D20E that you want to
change in Step step 3.
The D20E module is delivered with a factory-default project installed on it.
To change a running project configuration or install a new project configuration:
1.
Navigate to the Settings menu bar.
2.
Click Sync.
Result: The Device Information window appears.
3.
Type in the IP Address of the D20E module.
4.
Type in the Username admin and Password admin login credentials (default).
5.
Click OK.
Result: DAPserver Studio performs the Sync process and then restarts the D20E
module.
6.
Select Device > Explore to connect to the D20E module after is has restarted.
The DAPserver Studio version should match the firmware on the D20E module. If the D20E
is running a firmware version that is older than the DAPserver Studio software version,
DAPserver Studio may not connect (communicate) with the older D20E firmware device.
However, most older firmware versions on the D20E will connect to the latest DAPserver
Studio.
When working with projects, you can:
•
Create a new project; see subsection:
•
Open an existing project; see subsection:
•
Import an existing project from a:
–
Folder; see subsection:
–
Device (upload existing project configuration from D20E); see subsection:
an existing project from a device
•
Save a project; see subsection:
•
Delete a project; see subsection:
Create a project
Open a project
Import an existing project from a folder
on page 48
Save a project
on page 48
Delete a project
on page 49
GE INFORMATION
on page 44
on page 47
on page 47
Import
43
Advertisement
Table of Contents
