Oxymat 7 Technical Specifications - Siemens SIPROCESS GA700 Compact Operating Instructions

Climatic conditions
Ambient humidity (rel. humidity)
during storage, transport or opera‐
tion
Permissible ambient temperature
and humidity
9.2.4

OXYMAT 7 technical specifications

Table 9-11 OXYMAT 7: General technical specifications
General
Information on the smallest span
Max. power Warm-up phase
consumption
Weight (only module)
Electrical safety
Max. EMC error during operation with one
and/or two OXYMAT 7 / ULTRAMAT 7 units
1) The high-temperature version of the analyzer module is not intended for installation in the rack unit.
Table 9-12 OXYMAT 7: Measuring ranges
Measuring ranges
Number of measuring ranges
Parameters can Smallest possi‐
be assigned in ble measuring
the measuring span
ranges
Largest possible
span
The high-temperature version of the analyzer module is not intended for installation in the rack unit.
1)
Note
Temperature change with the high-temperature version of the OXYMAT 7
If you change the temperature range, you have to recalibrate the device. Further information
can be found in the operating instructions, see List of references (Page 107).
Table 9-13 OXYMAT 7: Gas inlet conditions
Gas inlet conditions
Sample gas pressure with internal pressure sensor
with external pressure sensor
Devices in explosion-proof design
Compact Operating Instructions, 01/2022, A5E35134047-11
< 90%
Technical specifications for operation in hazardous areas (Page 96)
OXYMAT 7
≤ 60 W
< 5.5 kg
1.0% in accordance with EN 61326-1 (2013)
OXYMAT 7
Max. 4; parameters can be assigned freely Max. 4; parameters can be assigned freely
0.5% O
2
100% O
2
500 ...2 500 hPa (abs.)
500 ... 3 000 hPa (abs.)
9.2 General technical specifications
OXYMAT 7 high temperature
See module nameplate or parameter sheet
≤ 120 W
< 7.5 kg
In accordance with EN 61010-1
OXYMAT 7 high temperature
2% O
2
100% O
Technical specifications
1)
1)
2
87