Technical Specifications Of The Wall Housing - Siemens SIPROCESS GA700 Compact Operating Instructions

Continuous gas analysis
Hide thumbs Also See for SIPROCESS GA700:
Table of Contents

Advertisement

Table 9-3
Rack-mounted housing: Option modules
Option modules
Option module 1.1
Option module 2.1
Option module 2.2
Table 9-4
Rack-mounted housing: Climatic conditions
Climatic conditions
Permissible operating altitude
Permissible ambient temperature
and humidity
9.2.3

Technical specifications of the wall housing

Table 9-5
Wall housing: General technical specifications
General
Installation position
Weight
Degree of protection
Table 9-6
Wall housing: Electrical characteristics
Electrical characteristics
Auxiliary power supply
Power consumption
EMC interference immunity
(electromagnetic compati‐
bility) during operation:
Electrical safety
Devices in explosion-proof design
Compact Operating Instructions, 01/2022, A5E35134047-11
12 digital outputs, with changeover contacts, max. load: 24 V AC/DC / 1.7 A
(total load for all 12 relay outputs in continuous operation max. 244 W), isolated, non-
sparking
8 digital inputs, designed for 24 V, isolated, freely configurable
6 analog outputs 0/4 ... 20 mA, designed for 24 V, isolated; load: R
6 digital outputs, load rating: 24 V AC/DC/1.7 A (total load for all 6 relay outputs in
continuous operation max. 122 W), isolated, non-sparking
6 analog outputs 0/4 ... 20 mA, designed for 24 V, isolated; load: R
4 analog inputs 0/4 ... 20 mA, designed for 24 V, non-isolated, internal resistance
100 Ω
4 digital inputs, designed for 24 V, isolated
3 000 m above sea level sea level
Technical specifications for operation in hazardous areas (Page 96)
Vertical
Approx. 23 kg
IP65 according to EN 60529
100 to 240 V AC (nominal range of use 85 to 264 V)
50 to 60 Hz (nominal range of use 47 to 63 Hz)
Max. 280 VA
with one or two OXY‐
in accordance with the standard requirements of NA‐
MAT 7 / ULTRAMAT 7
MUR NE21 (05/2006) and EN 61326-1 (2013)
units
with one or two CALO‐
in accordance with standard requirements of EN 61326-1 (2013)
MAT 7 units
in accordance with EN 61010-1, overvoltage category II
Technical specifications
9.2 General technical specifications
≤ 750 Ω
L
≤ 750 Ω
L
85

Advertisement

Table of Contents
loading

Table of Contents