Chapter 9 Startup Using V-Tool
9.2.4 System Registration
System registration is performed off-line using V-Tool at system design. The following
describes this procedure in details.
After system registration, the master station creates user programs using the network
variables.
(1) Creating the system folder
(2) Registering the master station side (S2, FL612)
9
50
Create the target system folder (e.g., FL-net (RIO_2000)).
The master station and a remote I/O station and the dummy station are registered to
the subordinate of this folder.
(a) Create a folder for the station treated as the mater station.
Example: S2 (model 2000)
(b) Register the base, S2PU72, and FL612.
Create the system folder.
Registration of the master
station side (S2, FL612)
Model 2000 FL-net (OPCN-2) Remote I/O Station Module (FL654) User's Manual