Gathering Ras Information Using Hyper Terminal - Toshiba V Series User Manual

Chapter 8 RAS Function

8.6 Gathering RAS information using Hyper Terminal

When FL654 is operated by "LOCK" or "AUTO", RAS information on FL654 can be gathered
by connecting the personal computer that operates the Windows hyper terminal with the
serial cable.
RAS information that can be gathered is as follows.
8
8.6.1 Initial Setting
Please connect FL654 and the personal computer that operates Windows hyper terminal
with the serial cable.
When the password is input, and the prompt ">" is displayed, it is possible to use it. The
password is "FL654" for FL654. There is a distinction between the capital letter and the
small letter in the password.
Please confirm the connection and the communication setting, etc. when the prompt is not
displayed.
34
RAS information
Node status
Version display
I/O layout
In-ring node map
Cyclic node map
Common memory area
data
RAS counter
Event log
FL-net log
Table 8-2 RAS information
Node status of FL654 module
Hardware and software version of FL654 module
Display I/O module layout that is mounted on FL654
List of node to enter network
List of node to which it enters network, and Cyclic data is valid
Display of content of common memory area that specified
node outputs
RAS counter of FL654 module
Event log of FL654 module
FL-net log information on FL654 module
Model 2000 FL-net (OPCN-2) Remote I/O Station Module (FL654) User's Manual
Content