Effect Send - Yamaha RM1x Owner's Manual

7. Voice

Effect Send

Track number
Track number
Parameter
Variation send level
(When variation
connection =System)
Variation switch
(When variation
connection =Insertion)
Chorus send level
Reverb send level
Dry level
(When variation
connection =System)
Track number
Transpose
* For information about how to change values, refer to the Basic Operation (page26).
64
RM1x SEQUENCE REMIXER
When variation connection = System
When variation connection = Insertion
Values
000 ... 127
ON, OFF
000 ... 127
000 ... 127
000 ... 127
01 ... 16
-36 ... 0 ... +36
Function
Sets signal level to variation-effect block.
Selects use/nonuse of variation effect.
Note that you can set the switch ON for one track only. (When you
set the value to ON, any other ON setting automatically changes to
OFF.
Sets signal level to chorus-effect block.
Sets signal level to reverb-effect block.
Specify for each track the amount that is sent to the Dry line of the effect.
Setting appears only if variation type is set to System.
Shows the current selected track number. Track number selection
can be accomplished via this parameter, or by the keyboard method
described on page 27.
Shows the current transpose value. Transposition can be accom-
plished via this parameter, or by the keyboard method described on
page 27.
Transpose
Transpose