Yamaha RM1x Owner's Manual page 21

7. Use the Real-time Controller Knobs
Try rotating the RM1x controller knobs to hear their effect.
The default parameters are labeled below each knob. The
[KNOB] button selects the "A" or "B" parameter group.
The knobs affect the currently selected track.
You can quickly select any of the 16 tracks by
pressing the appropriate white key on the
RM1x keyboard ("1" ... "16") while holding
the [TRACK] button. The number of the selected
track will be highlighted in the display.
• More on track selection on page 27.
The "A" parameter group (the upper default
parameters listed on the panel) are selected
when the [KNOB] indicator is lit, and the "B"
group (the lower parameters) is selected when
the [KNOB] indicator is out.
• More on the controller knobs on page 29.
8. Mute & Un-mute Tracks
Press the [MUTE] button so that its indicator flashes, then
use the white keys on the RM1x keyboard to mute and un-
mute tracks as required.
When the mute mode is engaged the indica-
tors above tracks which contain data will light.
Press a key once to mute a track which con-
tains data (its indicator will flash and "M" will
appear above the tracks number in the dis-
play). Press the key again to un-mute a muted
track.
• More on the Mute and Solo functions on
page 28.
9. Play an Arpeggio
Press the [ARPEGGIO] button so that its indicator lights, then
play an interval or chord on the RM1x keyboard. The RM1x
will automatically create an arpeggio based on the notes you
play.
Using the Arpeggio submode parameters you
can select several different types of arpeggio.
• More on the Arpeggio mode on page 62.
10. Experiment With Different Styles
Use control knob 1 to select different styles and experiment
with the various sections each contains.
Press the STOP button to stop playback
when done.
SETUP
21
RM1x SEQUENCE REMIXER