Connecting A Footswitch; Connecting External Midi Devices - Yamaha RM1x Owner's Manual

SETUP

Connecting a footswitch

When using a separately sold FC4 or FC5 foot switch, insert the foot switch plug into the FOOT SW jack located on the rear
panel.

Connecting external MIDI devices

Connecting a MIDI keyboard
Realtime recording input will be easier if you use a MIDI keyboard.
Use a MIDI cable to connect the MIDI OUT of the external MIDI keyboard to the MIDI IN connector on the rear panel.
Connecting a tone generator module
RM1x song and pattern playback data can be used to play an external tone generator module.
Use a MIDI cable to connect the MIDI OUT connector on the rear panel to the MIDI IN connector of the external MIDI
device.
18
RM1x SEQUENCE REMIXER
FC4 or FC5
MIDI IN
MIDI
OUT