<Reading System Data (Second Data)>
STEP1: Enter [ST].
• Classic Mode : [/] key
• Standard Mode : [F9] key
• Enter Mode
STEP2: Enter a command and then enter [DE].
• Classic Mode : Command + [Space] key
• Standard Mode : Command + [F8] key
• Enter Mode
STEP3: Enter first data and then enter [DE].
• Classic Mode : First data + [Space] key
• Standard Mode : First data + [F8] key
• Enter Mode
Second data is displayed.
STEP4: To view the second data that has been set as the next batch of first data, enter [S].
• Classic Mode : [Enter] key
• Standard Mode : [F4] key
• Enter Mode
The second data that has been set as the next batch of first data is displayed.
STEP5: To view the second data that has been set as the previous batch of first data, enter [-].
• Classic Mode : [-] key
• Standard Mode : [F5] key
• Enter Mode
The second data that has been set as the previous of first data is displayed.
STEP6: To view second data with the next YY number, enter [SYY].
• Classic Mode : [F9] key
• Standard Mode : [F6] key
• Enter Mode
Second data with the next YY number is displayed.
: [Esc] key
: Command + [Enter] key
: First data + [Enter] key
: [ ↓ ] key
: [ ↑ ] key
: [F9] key
6-6
Chapter 6 Command Mode
Using Command Mode
NWA-033628-001 Rev.1.0