Siemens Sinumerik 840D Operating Turning page 674

Section 2
Notes
B657
B657
Simple programming example
Highlight the respective tool (3D_PROBE) using the
blue cursor key on the CNC full keyboard and select
the VSK 1 "To program".
The input mask for the tool parameters opens.
4. Leave the values as follows:
Acknowledge the tool selection by pressing the VSK
8 "Accept"
The following program block is added to the work
schedule:
5. Now programme the straight line motion of the
measuring probe at rapid traverse rate.
Press the VSK 2 "Straight".
The input mask for the technology "Straight" opens:
6. Enter the following position values and press the
VSK 5 "Rapid traverse" to change the selection
feedrate to rapid traverse rate.
Acknowledge with VSK 8 "Accept".
The following program block is added to the work
schedule.
7. Now programme the motion of the measuring probe
in a straight line at rapid traverse rate.
Press the VSK 2 "Straight".
The input mask for the technology "Straight" opens:
Page 6 840D/828D SINUMERIK Operate