Siemens Sinumerik 840D Operating Turning page 544

Section 5
Notes
B601
B601
Various
Parameter Description
Adds an additive rota-
Additive
tion
Axes:
Turning around the
Z
Z axis
Turning around the
X
X axis
Turning around the
Y
Y axis
5.5.5.3 Setting the rotations
1. In the operating area "Program" and operaring mode
"JOG", "MDA" or "AUTO" press the HSK 1.6
"Various" and the VSK 5 "Transformations".
2. Press the VSK 3 "Rotation".
The window for setting the rotation parameters
opens.
3. Optionally change the graphic view on the blank by
pressing the VSK 2 "Graphic view".
4. Select if you want to add a new or an additional rota-
tion. Enter the values for every axis in degree.
Press the VSK 8 "Accept" to confirm your inputs or
press the VSK 7 "Cancel" to abort.
A new program block "Rotation" is inserted into the
program in the editor window (alike picture below).
Page 36
Help picture/Animation
(continuation)
Unit
mm
mm
mm
840D/828D SINUMERIK Operate