Siemens Sinumerik 840D Operating Turning page 487

Complex programming example
3. Insert the following values into the parameter mask:
Confirm your inputs by pressing the VSK 8 "Accept".
The following line is inserted into the program:
N110 WORKPIECE(,,"","CYLINDER",192,0,-100,-
80,100)
4. Insert now a measuring probe into the program.
Press the HSK 1 "Edit" to open the operating area
Edit.
Press the VSK 1.1 "To program".
The tool list window in the operating area
"Parameter" opens.
Use the blue cursor keys on the keyboard to select
the tool "3D_PROBE".
Press the VSK 1.1 "To program".
The program line N120 T="3D_PROBE" Is inserted
into the program.
Optionally you can program the tool by hand.
5. Program now the following G code commands:
N130 M6
N140 G0 X0 Y0 Z5
6. Program now the measurement cycle.
Press the "Extend"-key on the operator panel in or-
der to switch to the horizontal softkey bar 2.
The horizontal softkey bar 2 opens.
Press the VSK 2.6 "Measurem. turning".
The work area "Measurement milling" with extended
measuring functions opens .
Press the VSK 4 "Workpiece measure".
A vertical softkey bar with functions for measuring
workpieces opens.
Press the VSK 4 "One-point measurem.".
The input window for the CYCLE974 "One-pt.meas./
CYCLE974" opens.
840D/828D SINUMERIK Operate
Section 3
Notes