Siemens SINAMICS S120 Manual page 35

8 Drive Parameter Access
9. Attribute:
This is the parameter index.
For parameters without an
index, use "0".
10. Destination:
For reading a parameter select
a Controller scope tag where
the value will be written
If writing a value to the
parameter, select a tag in the
Source element entry.
11. Make sure the data type of the
tag (source/destination)
matches the data type of the
parameter.
INT = 2 Bytes (16 bit)
REAL = 4 Bytes (32 bit)
SINAMICS S: Speed control of a S120 with an Allen-Bradley controller
(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP
Entry-ID: 92045369, V4.0, 08/2018
35