Siemens SINAMICS S120 Manual page 34

8 Drive Parameter Access
5. To figure out what the drive
object number is, navigate to
"telegram configuration".
6. Find the corresponding drive
object number (e.g.
Red_Wheel = drive object 2
hex).
7. Class:
400 + drive object number
(hex)
8. Instance:
This is the parameter number
of the object, in Starter. E.g.
DC Link voltage (p26).
SINAMICS S: Speed control of a S120 with an Allen-Bradley controller
(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP
Entry-ID: 92045369, V4.0, 08/2018
34