Eco Driving Indicator Light; Remaining Hybrid Battery (Traction Battery) Charge Display - Toyota Prius+ Owner's Manual

Hide thumbs Also See for Prius+:
Table of Contents

Advertisement

2-2. Instrument cluster
Press and hold the "DISP" button for 1 second or more to
STEP
3
complete the setup.
If setup is not completed by pressing and holding the "DISP" button
for 1 second or more, or if nothing is operated within approximately
10 seconds, the screen will return and the settings will be lost.

Eco Driving Indicator Light

Eco Driving Indicator Light will turn on when driving power is lower than the
upper limit of Eco driving. It will turn off when the acceleration exceeds the
Eco driving accelerator upper limit or when the vehicle is stopped.
Eco Driving Indicator Light will not operate in the following conditions:
The shift position is anything other than D.
The driving mode is set to power mode or EV drive mode. (P. 221, 226)
The vehicle speed is approximately 130 km/h (80 mph) or higher.
Eco Driving Indicator Light can be set to activated or deactivated.
(P. 245)

Remaining hybrid battery (traction battery) charge display

The charge amount of the hybrid battery (traction battery) is automatically
controlled by the hybrid system. For this reason, even if electricity is recov-
ered via the regenerative braking, or electricity is generated via the gasoline
engine, the displayed hybrid battery (traction battery) charge amount may
not reach the highest level (level 8). However, this does not indicate a mal-
function.
246
PRIUS +_OM_OM47821E_(EE)

Advertisement

Table of Contents
loading

Table of Contents