If The Srs Airbags Deploy (Inflate); Srs Airbag Deployment Conditions (Srs Front Airbags) - Toyota Prius+ Owner's Manual

The main SRS airbag system components are shown above. The
SRS airbag system is controlled by the airbag sensor assembly. As
the airbags deploy, a chemical reaction in the inflators quickly fills the
airbags with non-toxic gas to help restrain the motion of the occu-
pants.


If the SRS airbags deploy (inflate)

 Bruising and slight abrasions may result from contact with a deploying
(inflating) SRS airbag.
 A loud noise and white powder will be emitted.
 Parts of the airbag module (steering wheel hub, airbag cover and inflator)
as well as the front seats, parts of the front and rear pillars, and roof side
rails, may be hot for several minutes. The airbag itself may also be hot.
 The windshield may crack.


SRS airbag deployment conditions (SRS front airbags)

 The SRS front airbags will deploy in the event of an impact that exceeds
the set threshold level (the level of force corresponding to an approxi-
mately 20 - 30 km/h [12 - 18 mph] frontal collision with a fixed wall that
does not move or deform).
However, this threshold velocity will be considerably higher if the vehicle
strikes an object, such as a parked vehicle and sign pole, which can move
or deform on impact, or if the vehicle is involved in an underride collision
(e.g. a collision in which the front of the vehicle "underrides", or goes
under, the bed of a truck, etc.).
 Depending on the type of collision, it is possible that only the seat belt
pretensioners will activate.
PRIUS +_OM_OM47821E_(EE)
1-8. Safety information
1
161