Overview Of Cycle Alarms - Siemens SINUMERIK 840D Programming Manual

Hide thumbs Also See for SINUMERIK 840D:

Table of Contents

Overview of cycle alarms

The alarm numbers are classified as follows:

• X=0 General cycle alarms

• X=1 Drilling, drilling pattern and milling cycle

• X=6 Turning cycle alarms

The table below lists the errors that occur in the

cycles, when they occur and how to eliminate them.

Alarm number

SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition

"No tool offset

"Thread lead

"Machining type

incorrectly defined"

Error Messages and Error Handling

Explanation, remedy

D offset must be programmed before the

cycle is called

Check parameters for thread size and

check pitch information (contradict each

The value assigned to parameter VARI

for the machining type is incorrect and

must be altered

Show Quick Links

Table of Contents

Sinumerik 840di Sinumerik 810d