Siemens SINUMERIK 840D Programming Manual page 84

2
Drilling Cycles and Drilling Patterns
2.1 Drilling cycles
int
_TECHNO
(SW 6.2 or
higher)
Function
The tool drills at the programmed spindle speed and
feedrate to the programmed thread depth.
With this cycle, tapping with compensating chuck
can be performed
• without encoder and
• with encoder.
2-84
Technological settings
UNITS DIGIT: Exact stop behavior
Values: 0...and as programmed before cycle call
1...(G601)
2...(G602)
3...(G603)
TENS DIGIT: Feedforward control
Values: 0...and as programmed before cycle call
1...with feedforward control (FFWON)
2...without feedforward control (FFWOF)
HUNDREDS DIGIT: Brake application point
Values: 0...without calculation
1...with calculation
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
2
03.96
09.01
© Siemens AG, 2002. All rights reserved